The difference between carbon fiber T800 and T1000

If you are concerned about carbon fiber composite materials, you will know that carbon fiber has many distinctions due to different raw materials. Carbon fiber composite materials are actually a new type of composite material that combines carbon fiber tows with a resin matrix. This involves the number of carbon fiber tows, which is to distinguish the difference between T800 and T1000 carbon fibers. This concept is mainly based on the carbon fiber models of Toray, Japan. This statement is also used in the industry. Then this article compares the performance of Toray's carbon fiber T800 and T1000 respectively.

The first is the meaning of T. T stands for the tensile strength of the carbon fiber tow, and the 800 and 1000 behind it represent the tensile strength. The unit of value here is Ksi, and we usually look at the product's tensile strength Mpa. They are not the same.

Let's take a look at the data comparison of carbon fiber T800 and T1000 materials.

From the above several sets of data, it can be seen that the product performance of carbon fiber T800 is different from that of T1000, and the carbon fiber composite material is also different, and the product performance after molding is also different. Many people don’t understand the sizing agent  on the sheets. In fact, sizing agent is to improve the carbon fiber tow and resin bonding performance. The surface of the carbon fiber needs to be treated. The treatment method is oxidation. Oxygen atoms are introduced on the surface of the carbon fiber to promote the fiber through chemical bonds. Data combined with resin. If we want high-performance carbon fiber products, we must make a choice at the raw material stage. At this stage, 3G Carbon provides civil carbon fiber T300 and T700 carbon fiber. Anyone in need, welcome to consult.