Production of Carbon fiber plate
Carbon fiber plate is a basic and commonly used carbon fiber product with light weight, high strength, high temperature resistance, corrosion resistance and aging resistance. Most carbon fiber processed parts are cut by the carbon fiber plate.
Carbon fiber prepreg is an important raw material for carbon fiber plate. The tow of carbon fiber prepreg is most common at 3K , and the rest is 1K, 6K, 12K,most woven in twill weave and plain weave. The specifications of the carbon fiber plates are various, and the first step in making carbon fiber plate is to prepare the raw material. The carbon fiber prepreg is cut according to the required length and width of the carbon fiber plate. The stock we use is one meter in width, therefore the maximum width we produce is one meter(1000*1200mm maximum). The number of layers of carbon fiber prepreg required is determined by the thickness of the required carbon fiber plate. The greater the thickness, the more layers of prepreg are superimposed.
After the raw material cutting preparation is completed, layup is required. In this process, the steel plate mold is used to wipe the steel plate repeatedly and then layup. Carbon fiber is an anisotropic structural material, so the laying process of carbon fiber prepreg need to pay attention to the angle. A reasonable layering angle can optimize the mechanical properties of the product. Most commonly layering angle is 0 degrees, 90 degrees. In addition, some customers will need 0 degrees, 45 degrees, 90 degrees.
After cutting and layup, it is the most important step-curing. Put the laid carbon fiber prepreg into the pressing machine, adjust the temperature, pressing time, pressure, and gradually cure under heat pressing and reach a certain degree of curing. In this process, it is necessary to control three factors to ensure high-quality carbon fiber. Therefore, the quality of carbon fiber produced by each factory is also different, and the production parameters become the secret information of the manufacturer.
3G Carbon is a professional manufacturer and exporter engaged in the design, development, production, and trading of carbon fiber -reinforced plastic like carbon fiber laminates and veneers (multiple color and patterns),carbon fiber solid sheets, and plates (in unidirectional, quasi-isotropic, and weaves in a variety of lengths, widths, and thicknesses) and Sandwich panels(with advanced foam core material).Our products are widely used in the field of RC drone parts, RC hobby parts, Sports, Decoration,Gift product and other industries.